| |
Approved Bodies:
- Must be 4”, scale appearing and factory production bodies of 007” or .010” thickness only
- No additional bodies will be approved during the season.
- Best O' the West:
- G-Force:
- 010 Caddy GTP
- 011 Stinger GTP
- JK Products :
- 70701 Peugeot open Cockpit
- 7014U Ultimate Peugeot
- 7073 Courage C41
- 7070U Ultimate Peugeot open cockpit
- K035 BMW 7176 Toyota
- Kelly:
- 1737 Bimmer
- 1750 Elise
- 1753 F1
- 1754 Countach
- 1755 Enzo
- 1756 Diablo
- 1757 Enzo HD
- 1759 F1 HD
- 1760 Caddy HD
- 1761 MK GTP
- Outisight:
- 065 BMW WSC
- 066 Mercedes CLR Ultimate
- 066E Mercedes CLR ISRA
- 067 Cadillac Ultimate
- 067E Cadillac ISRA/Short Wing
- 067I Cadillac LMP
- 068 Bentlee IMCA
- 069 Bentlee Ultimate
- 084 K-8 Porsche
- 085 BMW V12 LMP
- 300 BMW ISRA
- 301 BMW Ultimate
- Parma:
- 1103 Intrepid GTP
- 70506 Intrepid SS
- 70512 R8R SS
- 70513 R8R WSC
- 70514 Lola WSC Open Cockpit
- 70516 Storm WSC
- 70519 Ultimate Intrepid
- 70524 Lola HD
- 70525 Caddy Open Cockpit
- 70526 Caddy HD Open Cockpit 1045 Porsche
- Redfox:
- RFSC41SC Scale Fighter
- RFSC41LC Scale Fighter
- ToyTech:
- TR102 GTP KUDZU
- TR117 PONTIAC NASCAR
- TR124 '2000 TALON PRO GTP
- TR132 GTP PANOZ
- TR133 GTP MARCOS
- TR134 GTP SALEEN MUSTANG
- TR135 GTP CR5 CORVETTE
- TR142 GTP BMW COUPE
- TR155 CADILLAC ALMS GTP
- TR165 ALMS .007
- TR166 ALMS COUPE .007
Allowed Body Modifications:
- Must be 4” scale appearing, factory production body only.
- Front wheel well area must be left clear so front tire/wheel is completely visible.
- Bodies must have a visible bumper - no knife edge.
- Bodies must be have a max. rear spoiler height of 1 5/8” as measured from the tech block when mounted on its chassis and with .032” clearance.
- Rear panel may be cut out.
- Side panels behind rear wheels may be cut out
- Open cockpit bodies must have a multi-colored painted driver.
- Closed cockpit bodies:
- Must have a whole scale interior (no holes) and a three-dimensional multi-colored painted driver that covers all the car’s components.
- Interiors must be commercially available paper folded to make it 3d or plastic molded only. No hefty bags or flat paper interiors with driver glued to it will be allowed
- Interior must stay in the car at all times. If it drops out, fix it. Do not remove it or you will be black-flagged.
Disallowed Body Modifications:
- No add on spoilers.
- No see-through-paint jobs
- No sunroofs. Only front wheel area and windows maybe clear
- No tinted or painted windows-they must remain clear at all times. This includes rear side windows on bodies equipped with them.
- May not tear off back of body if damaged or after a body tucks. Tape, staples or glue may be used for repair
|
