| |
Approved Cut-Line Bodies
- Must be 007” or .010” thick only:
- JK Products:
- 7321 2002 Chevy Monte Carlo
- 7322 2002 Dodge Intrepid
- 7323 2002 Ford Taurus
- 7324 2002 Pontiac Gran Prix
- 70525 Toyota Camry
- 70524 Dodge
- 70526 Chevrolet
- 70527 Ford
- 70528 COT
- Kelly:
- 1716 ‘06 Camry HS
- 1717 ‘06 Camry HD
- 1720 Chevy Monte Carlo
- 1723 Ford Taurus
- 1724 Ford Taurus 2003
- 1725 Monte Carlo 2004
- 1747 Ford Taurus 2005
- 1748 Pontiac 2005
- Parma:
- 1010 '99 Pontiac Grand Prix
- 1014 2K4 HD Monte Carlo
- 1015 2K5 Ford Taurus
- 1033 Ford Fusion 2006
- 1034 Ford Fusion 2006
- 1081 Y2K3 Monte Carlo
- 1084 2K Ford Taurus
- 1086 2K Monte Carlo
- 1127 2006 Dodge Charger
Allowed Body Modifications:
- Bodies must be cut to the cut line. The cut line must be visible on the front and both sides.
- Must retain a minimum 1/8" rear bumper
- Bodies must have three matching numbers.
- Front wheel well area must be left clear so front tire/wheel is completely visible.
- Rear wheel well area must be cut out completely around the tire. (To the bottom of rear axle)
- Bodies must have a whole scale interior (no holes) and a three-dimensional multi-colored painted driver that covers all the car’s components.
- Interiors must be commercially available paper folded to make it 3d or plastic molded only. No hefty bags or flat paper interiors with driver glued to it will be allowed
- Interior must stay in the car at all times. If it drops out, fix it. Do not remove it or you will be black-flagged.
Disallowed Body Modifications:
- No add on spoilers.
- No see-through-paint jobs
- No sunroofs. Only front wheel area and windows maybe clear
- No tinted or painted windows-they must remain clear at all times. This includes rear side windows on bodies equipped with them.
- May not tear off back of body if damaged or after a body tucks. Tape, staples or glue may be used for repair
|
