|
Approved Axles, Wheels and Gears:
- Rear axle may be 3/32” or 1/8” diameter
- May use 48, 64, 72, or 80 pitch gears (plastic or metal OK)
- May use front axle of a minimum of .055” to a maximum diameter of .063”.
- May use front wheel minimum diameter of ½”
- May use commercially available soft rubber floppy tires
- All styles of front tires must be visible through front wheel openings
Allowed Axle, Wheel and Gear Modifications:
- May solder front axle where it passes through chassis
- May solder front wheel retainers to axle or chassis
- For flat tracks cars must tech to .032” clearance under rear of car including gear
- Exception, Fresno race will be run only on a banked track and MUST tech to .063
- Any current, commercially available black rear tire, maximum wheel width .810”
Disallowed Axle, Wheel and Gear Modifications:
- No axle tubes allowed front or rear
- No hollow axles front or rear allowed
|
