LMP Body Rules

Approved Bodies:

• Must be 4”, scale appearing and factory production bodies of 007” or .010” thickness only
• No additional bodies will be approved during the season.
• JK Products :
  • All LMP Bodies
• Parma:
• 1083 MG-EX 257
• Kelly:
• KE1741 Mercedes Benz
• KE1742 CLK
• KE1743 Audi GT-1
• KE1744 Foxfire

Note: No Daytona Prototype bodies are approved for the 2006-2007 season

Allowed Body Modifications:

• Must be 4” scale appearing, factory production body only.
• Bodies must be cut to the factory molded cut line and must be visible on the front and both sides.
• Front wheel well area must be left clear so front tire/wheel is completely visible.
• Rear panel may be cut out, but do not cut into the sides behind the wheel well above the cut line.

Disallowed Body Modifications:

• No add on spoilers.
• No see-through-paint jobs
• No sunroofs. Only front wheel area and windows maybe clear
• No tinted or painted windows-they must remain clear at all times. This includes rear side windows on bodies equipped with them.
• May not tear off back of body if damaged or after a body tucks. Tape, staples or glue may be used for repair