| |
Approved Bodies:
- No additional bodies will be approved during the season
- Must be 4”, scale appearing and factory production bodies of 007” or .010” thickness only:
- Parma :
- 1010 99 Pontiac Grand Prix
- 1014 2K4 HD Monte Carlo
- 1015 2K5 Ford Taurus
- 1033 Ford Fusion
- 1081 Y2K3 Monte Carlo (added 9/5/2006)
- 1084 2K Ford Taurus
- 1086 2K Monte Carlo
- 1127 2K5 Dodge Charger
- Outisight:
- 200 2K3 Chevy Monty Carlo
- 201 Chevy Monte Carlo
- Kelly:
Allowed Body Modifications:
- Bodies must be cut to the cut line. The cut line must be visible on the front and both sides.
- Must retain a minimum 1/8 in rear bumper
In order to be a legal body, the rear spoiler cannot extend above the roof height of the doghouse. a strait edge placed across the doghouse and the spoiler must show the spoiler end of the straight edge to be lower or level to the doghouse when mounted on the chassis (Deleted 9/20 ) - Interiors must be commercially available paper folded to make it 3d or plastic molded only. Car must have a whole scale interior (no holes) and a three-dimensional multi-colored painted driver that covers all the car’s components. No hefty bags or flat paper interiors with driver glued to it will be allowed
- Bodies must have three matching numbers.
- Front wheel well area must be left clear so front tire/wheel is completely visible.
- Rear wheel well area must be cut out completely around the tire. (To the bottom of rear axle)
- Interior must stay in the car at all times. If it drops out, fix it. Do not remove it or you will be black-flagged.
Disallowed Body Modifications:
- No add on spoilers.
- No see-through-paint jobs
- No sunroofs. Only front wheel area and windows maybe clear
- No tinted or painted windows-they must remain clear at all times. This includes rear side windows on bodies equipped with them.
- May not tear off back of body if damaged or after a body tucks. Tape, staples or glue may be used for repair
|
