| |
Approved Bodies:
- Must be 4 1/2” stock, scale appearing and factory production bodies only
- No additional bodies will be approved during the season
- Approved bodies are JK Products:
- JK71191 4 1/2” FORD
- JK71181 4 1/2” DODGE
- JK71171 4 1/2” CHEV
Allowed Body Modifications:
- Bodies must be cut to the cut line. The cut line must be visible on all 4 sides
- Interiors must be commercially available paper folded to make it 3d or plastic molded only. Car must have a whole scale interior (no holes) and a three-dimensional multi-coloredpainted driver that covers all the car’s components. No hefty bags or flat paper interiors with driver glued to it will be allowed.
- Bodies must have three matching numbers.
- Front wheel well area must be left clear or may be cut out so front tire is completely visible
- Rear wheel well area must be cut out completely around the tire. (To the bottom of rear axle)
- Interior must stay in the car at all times. If it drops out, fix it. Do not remove it or you will be black-flagged.
Disallowed Body Modifications:
- No add on spoilers.
- No see-through-paint jobs
- No sunroofs. Only front wheel area and windows maybe clear
- No tinted or painted windows-they must remain clear at all times. This includes rear side windows on bodies equipped with them.
- May not tear off back of body if damaged or after a body tucks. Tape, staples or glue may be used for repair
|
